Current Promo: Buy any set of XCELL XT Wheels and get a FREE set of the new RS tires and tubes! No code to enter, they will simply be included with your wheel purchase!
The XCELL™ Starfighter™ XT is the latest model from the pioneer of alloy skate wheels. With a twin spoke design, the Starfighter™ wheel is sure to turn heads - and improve your ride.
Like others in the XT series, it still fits all the popular tires like Evolve 7" and Kenda 8" tires...and everything in between. And XT-series wheels are made for our new RS series, flat-profile tires, at 165mmx62mm.
Measuring 53mm between the rims, this wide wheel has to be seen to be believed. It increases the contact patch as well as the overall track width of the board, resulting in a very confidence-inspiring ride and incredible grip.
Precision CNC Milled and Lathed from 7075-T6 aluminum, these dynamic wheels are extremely strong (and weigh in around 296 grams). Custom simulation studies for stress, as well as real-world testing, modification, refinement, and improvement, have resulted in the ultimate wheels for premium e-skate super sleds.
In plastic, two-part wheels, the bearings are in different halves of the wheel, resulting in misaligned bearings, which causes wheel wobble and increased rolling resistance. Plastic, two-part wheels simply do not have the high accuracy to compete in high speed road courses.
XCELL™ wheels, as a core innovating feature, contain both critical wheel bearings in a single piece of massively strong aerospace aluminum, compressing an aluminum spacer.
This setup increases accuracy of the bearings with respect to not only the shaft, but to each other – resulting in longer, better rolls and truer spin - along with an elimination of wobble present in lower quality plastics. You can feel the difference.
FINISH:
XCELL™ wheels are milled of 7075-T6 Aluminum (far stronger than 6001), lathed, and then smoothed and anodized for an outstanding appearance. Choose an anodized color like blue, red or black. Or try our new Nickel-Plated finish!
BEARINGS:
To maximize performance, we use top-quality Japanese NSK bearings. Or bring your own. The size needed is 6001 series, and 8 are required, along with four 22.4mm long aluminum spacers.
SCREWS:
For the Starfighter™ XT wheel, incredibly strong alloy steel screws are included. All screws enter from the back side, and anchor into the front half of the wheel. Unlike plastic wheels, changing all of the tires just went from being a nightmare to a 10 minute operation - for all four wheels!
FOR KALY NYC GEAR DRIVES:
We now offer anadapter kitthat allows all XCELL™ wheels to run on Kaly 2.0, XL40, and XL50 gear drives. This offers an incredible amount of customization of your Kaly board by opening up a ton of wheel options previously unavailable. For Kaly applications, make sure to select the 10mm bearing option.
XCELL™ PULLEYS:
A stock Lacroix pulley is fully compatible with Land-Surf™ XCELL™ wheels.
But we also have produced the most accurate, high-quality 72T pulley available for the Nazare and Lonestar. The main feature of this precision pulley is that it “keys” into the back of the XCELL™ wheel line, creating a more integrated, stronger interface between wheel and pulley.
XCELL™ ANODIZED M12 NUTS:
These center-lock inspired wheel nuts are awesome M12 nuts that come in 6 anodized colors. All with a lower profile than the stock nylock nuts for a sleek accent to any wheel. Available for Hypertrucks as well as the Matrix II axles as found on the Prototipo® and Jaws®. Works with any wheel.
PERFORMANCE:
Enjoy riding with your XCELL™ wheels and feel their sharper handling and true spin. The newfound precision of your board will be something you feel with every turn, and every stretch of smooth tarmac!
4 Complete XCELL™ Starfighter™ XT wheels in 7075-T6 aerospace aluminum
20 high strength, alloy-steel screws
8 Japanese NSK precision steel bearing and aluminum spacers.
3mm Ball Driver
Air valve extension
1-year warranty against manufacturing defects
NOTE: Make sure to specify in the comments at checkout which model of board you have if it's a Lacroix Nazare/Lonestar (and whether pulley drive or Falcon GEAR DRIVE, Supersport, Jaws, or Prototipo). This is to ensure the correct screw length is supplied.
Lacroix Falcon Gear Drives require a 1mm longer spacer, which is provided with a wheel purchase on request.
3D Servisas "Fat Boy" trucks and gear drive will also work with the correct screws and axle spacer. You can use M4x30mm flat top screws, 7mm pully standoffs, and a .5mm axle spacer for correct fit.
Make sure to specify that you are using a specific brand or type of drive, or if you are using the stock pulleys.
M12 wheel nuts in anodized colors (choose 7/16th for Protos / 3DS)
Mounting specs:
1) 10mm or 12mm axles (depending on bearings)
2) Length of both bearings and the middle 22.4mm spacer: 38.4mm (You need about 2" of axle to run these). 3) Screw pattern is MBS-based. Front wheels use M4x30 screws, rears use M4x50 screws (depending on application, pulley, or gear drive used)
XCELL™ wheels can fit just about anywhere MBS wheels do.
Drive become way more dynamic. Speed and board control improved immensely. Turn in sharp corners are piece of cake. Look awesome these hubs. Snowboard on wheels indeed.
I bought two sets of platys for the xr and two for the GT, haven’t installed them all yet but have installed them on my XRV, I’m having engagement issues but I’m using the thin sticky feet up front and am going to attempt Gripples, I’m a size 11 and have had engagement issues with a previous set also, I ordered these sets without grip so I could try something different. I still love the footpads and of corse the company, just wanted to let everyone know there may be issues but they can be resolved, just be patient. This is a very quality product here
Just what I was looking for. The peace of mind to know you can ride out a nose dive. The Fangs just saved me tonight when my GT took a sudden stop, the fangs rolled and I rode out the dive. A must for your board.
I returned Order # 45646 as instructed (by Matt) to be exchanged for Fangs GT that I really need. I have still never received my GT Fangs and if they are not in the mail by now then please, Please refund my $121.67 so I can re-order the proper Fangs for my GT.
Thank You.
Respectfully Yours;
John K Thompson
Product looks great installed and the idea of having a clean solution to any potential nosedive is well worth the cost. Solid construction and easy installation. The only criticism I have is that the fang doesn’t have a formed curvature to match the rail installation. It requires some flexing to **** in the front screws. Once installed, it’s a non-issue, I’m hoping the required bending doesn’t sacrifice structural integrity.
The FANGS GT are meant to conform to the curl of the rails of the GT boards once the screws are tight. It will not affect the strong, unbreakable texture of the Fangs.
The installation was seamless and worked really well. Even with the coaster, it has less body than a stock pintx bumper for those that seek uniformity in the presention…but the insurance plan for a possible nosedive is worth the sacrifice of plastic and teeth.
