Now on sale for a limited time!
The Platysense - There's nothing quite like it. Loved by riders all over the world for it's unique shape and super ergonomic feel, the Platy is available for XR and GT boards. It's the best improvement you can make in ride quality. Ride much farther with less foot fatigue, and get ultimate heal and toe control of your board!
The Platypus™ is made of tough urethane – flexible, unbreakable, shock and vibration absorbing, impervious to the elements, and is tough as nails! (Also works perfectly with VESC based boards).
The Platysense is a single-zone sensor. This makes mounting more reliable (since both zones appear to the Onewheel to be activated) and slow speed cutouts are avoided. To dismount, simply lift your heel from the front edge, or jump off, or do a stomp stop, or skid stop.
Need it for a Fungineers VESC controller box? We can make the wire route to the right side instead of center, and make it quite a bit longer for a perfect fit, at no extra charge. Just make a note of it at checkout in the "notes" box!
NEW FEATURE ALERT! PlatySense™ orders can now be configured with an optional 1/2 second delay until motor cut (only for stock controllers, DO NOT get the delay if your Platysense is going on a VESC board!). It's a simple, reliable solution that uses solid state electronics (no microprocessor that can lock up or fail) to give a very slight delay before the board is deactivated - this helps out immensely in everyday riding as well as trails (curb drops, bonks, rough terrain - these are all places where the delay feature shines!)
PlatySense™ kits are sold only as a pair of footpads (front and rear). If you already own a single Platy, email us for the option to buy a front PlatySense™ to match.
The colors are meant to match the stock bumpers from Future Motion as well as the Fangs™ 3.0 bumpers sold here on this site!
Grip tape is #20, max grit. If you want the grip tape left off, please make a note of that in the notes box at checkout!
Platypus™ with PlatySense™ units are hand-made once ordered and are available only in limited quantities. Once your order is in, you will be placed in the queue for production, which can be up to 1 week, but usually sooner!
The PlatySense™ system is non-returnable due to each order essentially being a custom build with your color and grip tape choice - Platys are made to order. Please make sure before you order that this is compatible with your board (XR or Plus only!)
Dismounting the PlatySense requires a heel lift from the front edge, or jumping off with both feet. Skid stops and stomp stops are fine also!
For riders doing really big drops, or you weigh more than 220 lbs, use a metal plate underneath, because the Platypus XR is urethane and somewhat flexible.
You can grab a metal plate for the xr here:
https://pevdispensary.com/products/footpad-backin-plate-for-onewheel
©2022-2023 Land-Surf, LLC.
